/

Search

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Free Shipping on orders over $150

Nano Outdoors Semi-Permanent Antifog Brush Pen

Final Sale

With our Nano Outdoors aqua defog brush pen, simply brush the inside of your lenses, and you will instantly see the underwater world clearly again, free of fog.

Our defog solution utilizes the latest anti-fog technology and is composed entirely of ingredients commonly found in foods and cosmetics. It creates a solid, durable protective layer of silica particles on your lenses that neither washes away nor releases chemicals into your eyes to cause irritation. This allows a single application to last comfortably through multiple uses and repeated washes. This feature offers a significant advantage over traditional gel and spray defog products, which release chemicals into your eyes, wash off easily, and require frequent reapplication. Additionally, only a tiny amount of our solution is needed per application, ensuring that one brush pen lasts for over 150 applications.

Our defog product is designed with kids in mind. Kids often take off their goggles and splash around, our tough defog coating stays effective even with lots of water contact and accidental finger touches. No other anti-fog products on the market offer this level of durability.

  • Key Features+
    • Product volume: 0.2 oz / 6 ml
    • Ingredients: Denatured ethanol, water, silica nanoparticles, surfactants and pH stabilizers.
    • Package includes: A Nano Outdoors aqua defog brush pen, an instruction sheet, and a lint-free fabric cloth.
  • Directions For Use+
    • The defog coating should only be applied to the inside of lenses. Applying it to the outside of lenses will not be beneficial and may damage the original UV and mirror coatings.
    • Avoid direct contact of the brush with water, as the defog coating may not adhere to your lenses.
    • Before applying our defog solution for the first time, it is strongly recommended to clean your lenses by finger- and/or nail-rubbing the surface with soap to remove any built-up grease. Rinse off the soap thoroughly, and then dry the inside of the lenses with the provided lint-free fabric sheet. Be sure to remove water trapped around the edges of the lenses. It is fine if some residues of the manufacturer's anti-fog coating remain on the lenses.
    • To apply the defog coating, press and release the button at the end of the pen one or more times to pump the defog solution onto the brush. Then, brush a thin layer of the solution over the entire inside of the dry lenses. As soon as the coating dries, rinse it with plenty of water, and you should see a water film over the coated areas. With that water film, put on your goggles to enjoy a fog-free experience.
    • Coating touch-ups or patching: In the case of incomplete brushing coverage or grease deposits over time, you might notice fog forming on a small spot of the lenses. Simply touch up the fogged area without removing the existing coating. Apply the touch-up directly onto wet lenses, starting from the center of the affected area. The defog solution will push the surrounding water away, preventing the brush from making contact with it. Wait until the patch is dry before wetting the goggles again.
  • Application and Maintenance Tips+
    • Recap the brush right after use to prevent it from drying out.
    • The coating will not prevent fog formation if it is not wet with water before wearing; Gently pour out water from eyecups to leave a thicker water film on lenses for the best fog-free experience.
    • Gently dampen the brush with the defog solution to apply a thin coating for fast drying (~1 minute). Avoid leaving noticeable brush strokes, as the areas between the stroke lines may not be coated.
    • If excessive defog solution is pumped onto the brush, remove the excess by brushing it against your hand. Yes, it is safe to do so.
    • For kids who are more likely to touch the inside of lenses, apply a thicker coating to make it finger-rubbing resistant. However, be aware that grease from fingers can shorten the effective time of the defog coating. A thicker coating may appear slightly cloudy upon drying, but once wet with water, it will turn transparent immediately.
    • While the solid coating remains intact through repeated washes, after several uses, grease and biofilm deposit may make it partially non-wettable and causing fogging in some areas. Then, simply reapply the coating over the entire lenses or patch the affected area.
    • After several applications of the defog coating, if lens transparency is noticeably reduced, consider removing the coatings by rubbing with your fingers and nails using soap, then reapply a fresh one.
  • Caution+
    Contains ethanol, store in a cool place, keep away from potential fire sources and out of reach of children.
  • SHIPPING & RETURNS+

    Shipping Policy

    Most items will be shipped from our warehouse within 2-3 business days. Exceptions may be made on low quantity items. Free shipping over $149.99 before taxes and after discount is applied. Shipping time is an estimate only and cannot be guaranteed.

    Return Policy

    Want to make a return? No worries, we accept returns and exchanges up to 30 days after purchase except for final sale items. Items for return may not be approved without an RA# please email info@team-aquatic.com with your order number and item to return to receive an RA#. The item must be returned in original and unused condition with all tags and packaging when applicable. Final sale items are team portal items, sale items marked 30% or more off, goggles, caps, fins, snorkels, nose clips, and ear plugs. Items purchased at a retail store may not be returned to our online store.

Are you eligible for a Shark Card Discount?

TAS Shark Club Program

Search